Bobber Bobber Motorcycles, page #4

Selling my custom built bobber. Hardtail with springer front. Satin black and red paint.

ESTATE DEAL, clear california title,been stored for less than a year,the bike was jump started,added fuel,Fired right up,idle fine,drag exhaust has nice sound,New engine was replaced less than 50 miles,owner was building the bike,needs some minor items for completion,battery may need replacing or completed charging,seat has small rip...needs complete servicing and safety check before highway riding,,,being sold as is.Being sold for much less than has been invested into the bike...International buyers are welcome, we will work with all shippers and can provide shipping quotes 

2012 South Side Kustom Bobber (includes everything but ENGINE)normal nicks and scratches, needs some wiring help but a new in box ultama wiring harness is includedTHIS BIKE HAS NO ENGINE!! I REMOVED A 96CI S&S, IT INCLUDES EVERYTHING SEEN IN PICTURES EXCEPT THE MOCK UP ENGINE USED TO SHOW THE COPPER !!!V-TWIN SPRINGER FRONT END - NEW THIS SPRINGCOMPUFIRE HIGH TORQUE STARTER- NEW THIS SPRINGULTAMA WIRING HARNESS - NEW IN BOXULTAMA 6 SPEED ULTAMA 2" OPEN PRIMARYDYNA ADJ IGNTION S&S SUPER E WITH INTAKEBATTERYNOTE: THIS WAS A RIDING BIKE 3 WEEKS AGO, I DONT TRUST THE WIRING AS STATED ABOVE, THE PICTURES SHOW AN ENGINE THAT IS NOT INCLUDED THIS IS LOCAL PICK-UP ONLY

            MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   2016 MMW FATSO ROLLING CHASSIS, EXILE STYLE FAT FRONT TIRE BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO OR TWIN CAM A  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  BLACK    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 FRONT WITH 150 TIRE  ,16 REAR WITH 200  TIRE, WIRE WHEELS WITH BILLET HUBS AND STAINLESS   SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).  AVON TIRES   , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, SUPER MX BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION) NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .

            MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   2013 MMW FATSO ROLLING CHASSIS, EXILE STYLE FAT FRONT TIRE BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO OR TWIN CAM A  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  BLACK    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 FRONT WITH 160 TIRE  ,16 REAR WITH 200  TIRE, WIRE WHEELS WITH BILLET HUBS AND STAINLESS   SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).  AVON TIRES   , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, SUPER MX BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION) NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .

            MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA OG HOTROD FAT TIRE BOBBER    2013 MMW OG HOTROD FAT TIRE ROLLING CHASSIS,  BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO , SHOVEL HEAD , PAH HEAD  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  CHROME    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 INCH WHEELS FRONT AND REAR WITH VINTAGE STYLE WHITEWALLS , FAT SPOKE  WHEELS WITH BILLET HUBS AND CHROME    SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).    , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, 1.25 BEACH  BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION) NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   .

            MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA OG  FAT TIRE BOBBER    2013 MMW OG  FAT TIRE ROLLING CHASSIS,  BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO , SHOVEL HEAD , PAH HEAD  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0 UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  CHROME    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 INCH WHEELS FRONT AND REAR WITH VINTAGE STYLE TIRES , FAT SPOKE  WHEELS WITH BILLET HUBS AND CHROME    SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).    , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, 1  BARS  NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   .

2005 Honda shadow that has been professionally built.. Frame has been stretched widened and lowered. 1930s ford taillight powder coated Springer white leather Seat Custom Dual pinstriped Headlights custom exhaust with Flame thrower Kit!

1999 custom yamaha vstar 650 bobber/cruiser, powder coat wheels, pipes,tank, custom seats. back seat comes with the bike runs great. for sale as is.

This bike is a must see with only 214 miles. just built and put on a shelf i start it up once a month   keep the battery and gas fresh    

One of a kind Suzuki Bobber. This bike is custom and you won't find another like it. If you want a bike that is loud and turns heads everywhere you go, this is the bike for you.

I am selling a 2002 Honda Shadow 600 bobber. Has a clean title. 4800 miles.

          MALIBU MOTORCYCLE WORKS 818-300-4299 ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 70 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS 1977-2003 SPORTY , OR 1990-2002 BUELL ( NOT BLAST MODELS )  2015  SUPER FUNK   250 SPORTSTER / BUELL BOBBER   RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 40 DEGREE RAKE   ,4  INCH BACK BONE STRETCH, 0 UP STRETCH ,, 250 RIGHT  SIDE DRIVE, ,, , OIL TANK UNDER MOTOR   ,SPRINGER   FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   18X8.5,26X3.5  FAT SPOKES  WHEELS WITH BILLET HUBS    . AVON    FRONT AND REAR TIRE  , REAR FENDER (REAR FENDER SUPPORT ALSO INCLUDED ,)     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,   RAPED APES  BARS,NECK CUPS , RACES , WHEEL SPACERS      NOTE :THE SHEET METAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .

Smooth, low and fast... this is a custom build 2013 Harley Soft Tail Bobber, 4.5 stretch mono shock has a 1978 xs650 Yamaha engine that is completely redone top and bottom with 277 rephrase crank and cam. 38 carbs with air pods, electric and kick start.

 This is a Cali Bobber, built by a reputable shop. Redemption Cycles California. Bike is 1980 750c Bobber Custom.

SPORTSTER WITH WIDEGLIDE FRONT END, FAT BOY RIMS, GROUND POUNDER STRAIGHT PIPES, CARBERATOR, PEANUT FLAT BOTTOM 1970's ,MODEL GAS TANK. BLACK 16" 1.25" APE HANGERS.

2006 Santee Custom 110, 2006 Clean title in hand! Santee straightleg Frame features stock stretch w/ 30 degrees of rake. Crate 96" S&S motor.

         MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW HOT ROD LEAF SPRING , 200 TIRE BOARDTRACK RACER , WHITEWALLS    HOT ROD BOARDTRACK RACER   2015 MMW  HOT ROD  BOARDTRACK  RACER  200 REAR , 21 FRONT  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 36 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  LEAF SPRING      FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)18X5.5 , 21X 2.15 RED WIRE WHEELS    WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .

complete bike, needs to be assembled and painted, all brand new parts, ultima evo motor 120 in 140 hp, exterior belt drive, have all MSO and receipts, motorcyle brand new and not titled yet

This bike is ready to ride, it was built and test riden but never titled. Some Options: 6-speed Left side drive Tranny 200 back tire Great Stance Custom Paint Job Too much to list: Please call Kevin at 270-210-6448 for more info I am listing for him, so if you email questions I will respond with his number. Thanks for looking, happy bidding!!!

         MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW SCHWINN STYLE 23,23     BOARDTRACK RACER WITH HOOP  SPRINGER    SCHWINN STYLE    2016 MMW  SCHWINN  STYLE BOARDTRACK   23'S  FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 35 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  SPRINGER     FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)23X3.75 , 23X3.75 WIRE   WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS ,SPECIAL SHOCK    SPRING SEAT , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .

Up for sale is my custom 2009 bobber.  This is a kit bike by Southern Motorcycle Works which sells for $11k new. It's a hardtail with a 100" ultima v twin, ultima 6 speed transmission with a BDL 3" open belt drive.  Springer front end, disk brakes front and rear, no gauges.

Custom Built Bobber Motorcycle Made From A 1981 Yamaha XS 650. This Is A Brand New Build With Around 100 Miles. This Bike Is Turn Key And Ready To Ride.

         MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD ,SPORTSTER AND SOME BUELLS  2013 MMW NEW SCHOOL OG 200 TIRE BOBBER, 23 FRONT     .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  OR BELT  ,35 DEGREE RAKE   ,2 INCH BACK BONE STRETCH, 0  UP STRETCH ,,  LEFT  SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  NEW HOOP SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X5.5 , 23X3.5  MMW WIRE  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR AVON    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  RISER,GIMP  APES BARS ,  , KICK STAND NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .

         MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA  BACK BY POPULAR DEMAND !!!! SET UP FOR BIG TWIN EVO OR TWIN CAM HARLEY OR AFTERMARKET MOTORS ( WE CAN ALSO MAKE THIS FOR SPORTY/ SOME BUELL ) 2013 SUPER SCHWINN STYLE   TRACKER 23 FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .

 Custom 96 Honda VLX 600 Bobber  Took no shortcuts on this build! Bid with confidence knowing you are not only getting a "badass" bike, but also a reliable one! Extremely LOW miles for the year!

This is a South Florida Choppers built custom Springer ridged with a Harley Davidson 1340cc EVO.  It has a new fat bob 4 gallon tank and all tins were recently powder coated satin black.  The bike only has about 1000 miles on it and runs great.  Only selling because I need the cash.  Very light weight and fast bike. I am the original owner. Buyer will pay shipping.

Up for auction is my custom built 2009 Bobber. I purchased all of the parts during a long deployment to Iraq and assembled the bike upon my return in 2009. I live in Ohio and the bike is located at my fathers in Colorado so I have not had time to ride it and it is a shame for it to sit, hopefully someone will win and it can finally be used the way in which it was intended.

CUSTOM RIGID BOBBER BUILT IN OUR PROFESSIONAL SHOP. 113 CU. IN.

It's time to ride! Selling my 2000 Custom. 90 cu in.

Here is the perfect canvas for somebody to build the bike of their dreams.  All of the top-shelf major components for the price of an engine.  New frame.

CUSTOM BOBBER This is the latest build at FLYINEYEBOBBERS. Custom paint (FEB logo) White powdercoated wheels NEW wide whitewall tires 12 inch chrome apehangers White solo seat Custom exhaust LOW & LOUD Side mounted tail light Hardtail HD style Headlight (clear lense) Push button start   Questions call 336-469-2188

CUSTOM BOBBER This is the latest build at FLYINEYEBOBBERS . Custom metalflake paint 12 inch apehangers Diamond tuck solo seat Hardtail Low & Loud Custom wrapped pipes Side mounted tail light   Call 336-469-2188

Up for grabs is a 1973 ironhead chopper. Over 8.5K Invested in it.  1973 1000/Bored to 1100 Ironhead motor in a 2003 Harley sportster hard tail frame and a springer front end. This is a bad ass one of a kind bike.

This custom bobber is built upon a 1999 Yamaha Roadstar foundation.  Less than 12,500 on this engine, the bike has been rebuilt with new and custom parts for an exceptional and unique bobber look. Features: Custom fender work and paintNew Metzler ME 880 21" Front Tire on Powder Coated Spoke rim.New Metzler ME 880 200 Wide Rear Tire on Powder Coated Spoke rim.LED integrated turn signals in front/rear.Custom red wrapped exhaust (straight pipes).  Deep/Loud, sure to get attention.Internally wired Powder Coated T-Bar handlebars1929 Ford Pickup Headlight Model T Ford Rear Tail/Stop lightCustom Rear Fender / Luggage Rack / Sissy BarOpen Front Pulley (you can see it turning as the bike moves)Matching Powder Coated Rear Pulley / Belt GuardMotion Pro Stainless Steel Cables & Chrome GuidesCustom Side PanelsRetained the suspension and swingarm to ensure a smooth ride (but still gives that bobber look)Chromed Forward Controls This bike is a blast to ride.  Pulls strong and barks loud.  It turns heads everywhere I've taken it.   The title remains on a 1999 even though I would consider this a custom build.  Insurance on a 1999 bike is significantly less expensive than titling it as a 2016 build.   Something to consider. This is one of many Roadstar bikes I've built this year.  I know these bikes.  If you have questions, please ask - I'm sure I can easily answer any concerns or inquiry.  This bike was a joy to build and even more fun to ride.  I simply want to pass this along so I can begin another project.

100 cubic inch Ultima motor, 5 speed transmission, 15 inch ape hangers, 21 inch front wheel, custom paint, lots of chrome. Pick up only. Located in Cave City, KY 

Jeremy Coon (888) 467-2410 9803 North Hwy 301 Wildwood Florida 34785     15 Demon Bobber Vehicle Information Year: 2015 Make: Demon Model: Bobber Condition: used     1 of 12  View Large Images   Description CUSTOM SPRINGER BOBBER!! SPRING SEAT, MINI APES, CUSTOM FOWARD CONTROLS, CHROME CALIPERS, AND MORE!! FINANCING RATES STARTING AT 3.64% FOR 75 MONTHS!!

This is a 93in. S&S Shovel Head Engine on a 2004 Softail Frame. Engine only has 6000 miles on it.

This is a no reserve auction for a Bobber Rolling Chassis and includes Frame (30 degree neck and 0 stretch), 41 mm wide glide front forks, 40 spoke wheels, tires, 113" Ultima includes ( carb, intake, air cleaner and single fire igntion), 6 speed transmission, fuel tank, round oil tank with battery box, handlebars, risers, headlight, axles, spacers and neck bearings, This set-up is a great start for a cool old school bobber. MSO's for the frame , motor, and trans are included. We also have springer front ends available.

2005 PROPER CHOPPER, 357 BOBBER 107ci S&S ENGINE  5 TRANSMISSION  130/90/16 FRONT TIRE  140/90/16 REAR TIRE  12' CUSTOM APE HANGERS  NEW BATTERY  FRESHLY WRAPPED EXHAUST PIPES  IT COMES WITH THE FRONT FENDER AND MOUNTING HARDWARE , BUT I LIKE HOW IT LOOKS WITHOUT IT ON. THIS BIKE IS A MONSTER TO RIDE , SUPER QUICK AND TON'S OF TORQUE  I WOULD NOT RECOMMEND THIS BIKE FOR A BEGINNER STARTS GREAT AND RIDES GREAT  TEXAS RESIDENTS ARE RESPONSIBLE FOR ALL LOCAL STATE LICENSING FEE'S PLEASE EMAIL, CALL OR TEXT WITH ANY QUESTIONS  THIS BIKE IS FOR SALE LOCALLY SO AUCTION MAY END EARLY 

         MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 50 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW   26,26 HEATHEN SUPER  BOARDTRACK RACER    .   2013  MMW  26,26 SUPER  BOARDTRACK RACER , 26 FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .

SRK Cycles  |  155 E. Sun Hill Rd. Manheim, PA 17545   |   (717) 395-8892   |   www.srkcycles.com Detailed Walk-Around Video Commentated Test Drive Video 2007 Custom built Bobber   Who We Are Not computer savvy?

1996 Harley Davidson Custom Bobber Great looking custom bobber.  I did not originally build this bike, but did take it down to the frame, and re-build it back to what you see, after I acquired it. The frame is now a rigid sportster, which was stripped and powder coated. The tins are also all powder coated the same color as the frame, which is a dark cherry color.  I do have a front fender, to go with the bike, just don’t have it on in the pictures.

This bike is in beautiful condition. I am the only owner. I rode it quite a bit the year I bought it and only a handful of times since.

    MALIBU MOTORCYCLE WORKS CALL US 7 DAYS A WEEK 818-300-4299 MIKE SIMS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE     PLEASE CALL ME  818-300-4299 OR E-MAIL ME   FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO 2016 OG DRAG STYLE TRIKE , SOFTAIL , 23 FRONT    2016 MMW  OG DRAG   STYLE  TRIKE ROLLING CHASSIS  , , SET UP FOR EVOLUTION MOTORS, SHOVEL HEAD , PAN HEAD ECT ECT  UP TO 127 INCH AND TWIN CAM A  ( USES A TWIN CAM REAR ADAPTER BRACKET) , SOFTAIL  ,30 DEGREE RAKE  ,0 INCH BACK BONE STRETCH ,0  UP   STRETCH  , LEFT SIDE DRIVE,  , ,, ROUND  OIL TANK  ,BLACK   FRONT FORKS (  OTHER FRONT FORKS AVAILABLE 41MM , INVERTED ECT ECT )     15X10 CORVETTE   WHEELS BLACK  POWDER COATED ( OUTSIDE BEAUTY RINGS AVAILABLE),  ,  TIRES   ,23 FRONT WIRE WHEEL   (WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BILLET BLACK ,POLISHED OR CHROME FINISH ,WIRE WHEELS.) .   ,   ,CAN BE SET UP FOR PASSENGERS, , NEW BEARINGS AND WHEEL SPACERS,REAR ROTORS AND CALIPERS INCLUDED , SET UP FOR CHAIN OR BELT WITH DIFFERENTIAL , CUSTOM     GAS TANK  ,CUSTOM HAND MADE BARS , RISERS , CHROME ADJUSTABLE SHOCKS REAR SLIPPERY DIFFERENTIAL     THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE On Aug-30-07 at 08:22:39 PDT, seller added the following information:

This is a 2005 springer bobber. The actual name of the bike is a lil bruiser. Its made by the company Revolution.

Custom Bobber by Chop Machine Custom Motorcycles. We use only quality parts on all of our builds. We also put the original VIN number back in the neck so all of our bikes retain the original Harley Davidson title.

Vintage Style Modern Bobber. Street legal I am original builder/owner. This is a new build 2007.

Harley Davidson 103" Twin Cam Motor Baker 6 Speed RSD Transmission Rolling Thunder Frame (Heavy Duty Great Frame) ! Springer Front End- Works Awesome !     Rides Great for a Rigid with spring seat and big tire ! 300 Rear Tire Ride Wright Custom Wheels (Black w/ Gold Spokes)   No Paint !   It looks so cool like this I never took it apart to paint it !    No turn signals !

Year: 1974 Model: Iron Head Builder: FD Motorcycle and Customs Displacement: 995.7cc Carb: S&S Shorty Air Cleaner: S&S Exhaust: Straight Pipes Transmission: Right side shift 4 speed Frame: 1974 Custom Hardtail       Rake 38 Degrees       4" Stretch Wheels: Front Wheel Size 21" 40 Spoke Rim     Tire is an Avon Speedmaster Front Brake: N/A Rear Wheel: Stock H-D    Size 16" Spoke   Tire is a Shinko 130/90-16 Rear Brake: Drum H-D Stock Paint: Color Gloss Black    Engine: Satin Black Accessories: Foot Controls & seat built by FD Motorcycle and Customs. Rear fender ribbed 5" wide. Tail Light Brass by FD Motorcycle and Customs.

I'm selling my 2008 Custom built Bobber, It has a Kraft Tech frame, Rev Tech 1650 with baker 5sp trans, Head work with custom cams, performance clutch, custom Mikuni carb, Performance Machine brakes, Springer front end, Etc... Bike is in great shape and runs like a beast!!!! Bike is a real head turner and has been featured in multiple Write ups.

This bike has been well maintained, filters and fluids replaced every year, I've owned it (3 years), replaced primary seals, new battery as of last year, new speedometer (approx. 5000 miles), rebuilt carburetor, re-jetted (came from HI to MT), and is a real head turner. I am only selling to start a family and won't be riding much.

If your looking for an attention getter.....This is it! Custom built motorcycle Bobber style Mat Black paint unique solid chrome wheel in the rear, and wire wheel in the front. mechanically the bike is in excellent condition.

2010 Custom, Harley, Bobber, Chopper, with a stock 2001 Harley B motor with Harley 5 speed transmission and a S & S super E carb, Paughco straight leg frame with 30 degree rake and 2�1/4 stretch in down tubes, DNA springer, Rev-Tec wheels, and new Dunlop tires. The front tire is a 21 x 3.5 and the rear is an 18 x 9" (200mm). The bike runs and rides perfectly and has air bags under the seat that you can pump up with a hand held pump.

    MALIBU MOTORCYCLE WORKS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE  PLEASE CALL ME  818-300-4299 OR E-MAIL ME  FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO JUST FINISHED  MMW MALIBU CRUISER  ( ROOKE STYLE )   2013 MMW  MALIBU CRUISER  23 FRONT  ,20X 200 REAR    ,    ROLLING CHASSIS LEFT SIDE DRIVE   ,   , , RIGID ,  ,2  INCH BACK BONE STRETCH , SPECIAL DOWN STRETCH , GIRDER    FRONT END WITH    AIR SHOCK ,20X7  REAR , 23 FRONT NITRO      WHEELS WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BLACK ,POLISHED OR CHROME FINISH .) .  BRAND NEW 200 ,23 FRONT TIRE  , 9 INCH WIDE   REAR FENDER , , , , NEW BEARINGS AND WHEEL SPACERS, SPECIAL MMW HAND MADE  GAS TANK UNDER SEAT  ,,  , MMW   BARS   , RISERS , BILLET  KICKSTAND WITH HIDDEN SPRING, UNDER TRANNY OIL TANK    THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE On Aug-30-07 at 08:22:39 PDT, seller added the following information:

 THIS Bobber built for advertisment and promotion af a famous clothing company. " TRUE RELIGION SPRING 2012 - THE REBEL " Check this web site ! http://www.youtube.com/watch?v=kkXdqguDYxU AND IT IS LOUD, FAST, AND FUN TO RIDE.

Dream Machines Indian Motorcycle Visit Store 1401 N. Interstate 35 Round Rock, TX 78664 Contact: Our Sales Team! Phone: (512) 309-7503 ext.5 Email: sales@dreammachinesofaustin.com Vehicle Information VIN FLA63818 Condition Used Odometer 1 Stock No A63818 Warranty Unspecified Engine Buell Thunder Storm Transmission 5-SPEED Exterior Color Black Interior Color Flat Black Loan Calculator 2010 Custom Buell Bobber Description *AS COOL AS IT GETS* YOU ARE LOOKING AT A 2010 CUSTOM BOBBER (BIKE DOES NOT HAVE ODO OR SPEEDO SO IT WILL BE TITLED AS NOT ACTUAL MILEAGE).

Penn Jersey Cycles bobber...I had the bike built and had a baby soon after. Now I have 0 time for the bike. It's a rigid with a springer fron end, 80' evo motor or 1340cc...its a bad a** bike

Partaker of exhibitions Kiev Kustom Kulture 2015, Kustom Konvent Poland 2016.

I'm selling my 2013 bobber built by Revolutions Speed & Customs Inc.  This bike still has the original builder title and has never been titled in anyone's name.  I honestly purchased the bike to flip. I'm getting married in October and I'm using the money to help pay for that.  When I purchased the bike, it wasn't in running condition.  The gas smelled like paint thinner.  The bike had been sitting for a long while and I bought it without being able to hear it run.  The previous owner just let it sit in his garage, it never even had a license plate mounted to it. I got it running after a gas tank flush and going through the carb.