Find or Sell Motorcycles & Scooters in USA
  • bobber rigid frame motorcyclebobber rigid frame motorcycle (2011)
    complete bike, needs to be assembled and painted, all brand new parts, ultima evo motor 120 in 140 hp, exterior belt drive, have all MSO and receipts, motorcyle brand new and not titled yet
    2013-09-03 04:01:41
    Manteno, Illinois, US
    0
    5,500.00
  • 1984 Custom Built Motorcycles Bobber1984 Custom Built Motorcycles Bobber (1984)
     This bike is something that a project bike. Someone that had it before head taking off all of the wiring. So all of the wiring is fairly new wiring harness, new paint, New paint on the frame as well.
    2016-12-17 04:41:00
    Sedalia, Missouri, United States
    1
    22000
  • 2015 Custom Built Motorcycles Bobber2015 Custom Built Motorcycles Bobber (2015)
    1 UP CUSTOM MOTORCYCLE JUST BUILT 2014 121' total performance moter 135 horse power less then 1500 miles on moter baker 6 speed transition chain drive 1 of a kind springier front end 23"frount tire custom spoke wheels custom seat custom paint MUST SEE TO APPRECIATE
    2016-12-15 04:42:30
    Nampa, Idaho, United States
    1
    12,500.00
  • 2017 Custom Built Motorcycles Bobber2017 Custom Built Motorcycles Bobber (2017)
     RODS & RIDES BT RACER The BT Racer is one of our #1 Selling Motorcycles for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The motorcycle is also not a little bike like so many others, it measures an whopping eight foot long and riders that are six foot plus look more fitted than any other bike in the market place.
    2016-11-19 04:53:56
    Saint Louis, Missouri, United States
    1
    31,995.00
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    2006 custom bare bones bar hopper, fast and loud.  Set up with 110 revtech with 6 speed, 3" bdl open primary.  18x250 rear, 26x3 front avon (new).ready to ride approx 1600 miles, registered and inspected in VA so its legal.
    2016-11-10 04:42:56
    Virginia Beach, Virginia, United States
    1
    20082
  • 2007 Custom Built Motorcycles Bobber2007 Custom Built Motorcycles Bobber (2007)
    Selling a one of a kind custom built Bobber. It was built using a 2007 Flyrite Bobber frame. It is a hard tail with a springer front end.
    2016-11-07 04:41:56
    Lufkin, Texas, United States
    1
    28009
  • 1973 Custom Built Motorcycles Bobber1973 Custom Built Motorcycles Bobber (1973)
    Up for grabs is a 1973 ironhead chopper. Over 8.5K Invested in it.  1973 1000/Bored to 1100 Ironhead motor in a 2003 Harley sportster hard tail frame and a springer front end. This is a bad ass one of a kind bike.
    2016-10-06 04:44:17
    Long Beach, California, United States
    1
    6,300.00
  • 1998 Custom Built Motorcycles Bobber1998 Custom Built Motorcycles Bobber (1998)
    This Bobber Rat Bike was professionally built by Bobber Pros of Mesa Arizona. It was built on the framework of a 1998 883 Sportster. It has a hardtail frame and a springer front end.
    2016-10-06 04:44:07
    Windham, Maine, United States
    1
    12,900.00
  • 2017 Custom Built Motorcycles Bobber2017 Custom Built Motorcycles Bobber (2017)
    Toll Free Number: (855)-ROD RIDE Rods & Rides is not just a brand name, its a style of its very own. The brand represents true American craftsmanship by using American materials and built in Saint Louis, Missouri USA.  The brand is a very well known name in the national motorcycle shows,  magazines, and several TV channels but that's not where is stops. The brand can be found in many value guides as well, one of which is KBB (Kelly Blue Book).
    2016-10-05 04:45:47
    Saint Louis, Missouri, United States
    1
    26,995.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
     RODS & RIDES MOTORCYCLE COMPANY SAINT LOUIS, MISSOURI USA SPECIAL ORDER, PLEASE ALLOW 8-10 WEEKS FOR COMPLETION RODS & RIDES 330 TRIKE CHASSIS SPRINGER FRONT END BLACK OR CHROME SPOKE WHEELS FAT BOB SPLIT TANKS TWO TONE PAINT OR MONO WITH PIN STRIPES EL BRUTO EVO ENGINE 6 SPEED TRANSMISSION DUAL 4 PISTON BRAKES 3.35" OPEN BELT DRIVE TOLL FREE: 855-ROD-RIDE
    2016-08-26 04:57:36
    Saint Louis, Missouri, United States
    1
    34,995.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
     RODS & RIDES DROPSEAT BOBBER The Dropseat Bobber is our #1 Selling Motorcycle for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The seat sits twenty inches off the ground and allows the rider the true dropseat feel.
    2016-08-18 04:54:00
    Saint Louis, Missouri, United States
    1
    27,995.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
     RODS & RIDES DROPSEAT BOBBER The Dropseat Bobber is our #1 Selling Motorcycle for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The seat sits twenty inches off the ground and allows the rider the true dropseat feel.
    2016-08-18 04:53:57
    Saint Louis, Missouri, United States
    1
    27,995.00
  • 1999 Custom Built Motorcycles Bobber1999 Custom Built Motorcycles Bobber (1999)
    100 cubic inch Ultima motor, 5 speed transmission, 15 inch ape hangers, 21 inch front wheel, custom paint, lots of chrome. Pick up only. Located in Cave City, KY 
    2016-08-04 04:55:23
    Cave City, Kentucky, United States
    1
    6,500.00
  • 2007 Custom Built Motorcycles Bobber2007 Custom Built Motorcycles Bobber (2007)
     2007 Custom Built Bobber. Has springer front end with 16" ape hangers. Bike also has Harley Engine, 88B with Mikuni carb and a Total Performance Transmission.
    2016-07-30 04:57:03
    Champlain, New York, United States
    1
    34000
  • 2014 Custom Built Motorcycles Bobber2014 Custom Built Motorcycles Bobber (2014)
     2014 drop seat bobber with fresh and completely dry 1981 1000cc Ironhead motor that runs like a champ. Motor was kept original looking as possible with OG black lower jugs and clear coated uppers. Super E carb, Dyna coil, BIG 2 into 1 custom exhaust with heat wrap that sounds great with no popping or backfiring.
    2016-07-21 04:56:53
    Jasper, Alberta, Canada
    1
    21000
  • 2008 Custom Built Motorcycles Bobber2008 Custom Built Motorcycles Bobber (2008)
    Completely one of a kind custom bobber featuring a 127" Ultima motor. Custom Exhaust, Pingel fuel valve, mini-apes, Coker 5" tires (front and back), a pitot tube off a Cesna (does not serve any real purpose on the bike but looks cool), compression release valves. Billet tail light and head light.
    2016-07-14 05:05:57
    Chicago, Illinois, United States
    1
    14,000.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
    Custom build by Dos Homdres Cycles. Paint by Viking Cycle Art. Inc.
    2016-07-12 04:56:55
    Ocala, Florida, United States
    1
    12,000.00
  • 2010 Custom Built Motorcycles Bobber 2010 CUSTOM BUILT BUELL BOBBER *WE SHIP*2010 Custom Built Motorcycles Bobber 2010 CUSTOM BUILT BUELL BOBBER *WE SHIP* (2010)
    Dream Machines Indian Motorcycle Visit Store 1401 N. Interstate 35 Round Rock, TX 78664 Contact: Our Sales Team! Phone: (512) 309-7503 ext.5 Email: sales@dreammachinesofaustin.com Vehicle Information VIN FLA63818 Condition Used Odometer 1 Stock No A63818 Warranty Unspecified Engine Buell Thunder Storm Transmission 5-SPEED Exterior Color Black Interior Color Flat Black Loan Calculator 2010 Custom Buell Bobber Description *AS COOL AS IT GETS* YOU ARE LOOKING AT A 2010 CUSTOM BOBBER (BIKE DOES NOT HAVE ODO OR SPEEDO SO IT WILL BE TITLED AS NOT ACTUAL MILEAGE).
    2016-07-01 04:57:41
    Round Rock, Texas, United States
    1
    8,950.00
  • 1975 Custom Built Motorcycles Bobber1975 Custom Built Motorcycles Bobber (1975)
    Year: 1974 Model: Iron Head Builder: FD Motorcycle and Customs Displacement: 995.7cc Carb: S&S Shorty Air Cleaner: S&S Exhaust: Straight Pipes Transmission: Right side shift 4 speed Frame: 1974 Custom Hardtail       Rake 38 Degrees       4" Stretch Wheels: Front Wheel Size 21" 40 Spoke Rim     Tire is an Avon Speedmaster Front Brake: N/A Rear Wheel: Stock H-D    Size 16" Spoke   Tire is a Shinko 130/90-16 Rear Brake: Drum H-D Stock Paint: Color Gloss Black    Engine: Satin Black Accessories: Foot Controls & seat built by FD Motorcycle and Customs. Rear fender ribbed 5" wide. Tail Light Brass by FD Motorcycle and Customs.
    2016-06-30 04:51:32
    Fort Dodge, Iowa, United States
    1
    16000
  • 2013 Custom Built Motorcycles Bobber2013 Custom Built Motorcycles Bobber (2013)
    CUSTOM BOBBER, HIGH END BUILD, THE BADDEST BIKE AROUND. 30" CUSTOM WHEEL, AIR RIDE, CUSTOM LEATHER AND PAINT, 5 SPEED, RUNS GREAT, VERY FAST, SERIOUS BUYERS ONLY 29,900 WILL GO UP IN THE SPRING. THIS IS DIRT CHEAP AND ONLY FOR SALE BECAUSE OF MOVE.
    2016-06-14 16:01:03
    Oklahoma City, Oklahoma, United States
    1
    19,990.00
  • 2012 Custom Built Motorcycles Bobber2012 Custom Built Motorcycles Bobber (2012)
     Whole shot. This is a full custom one of a kind bike built in 2013. This bike was built by KAELINS custom cycles. New S&S 89ci motor built by custom design studios in Novato CA.
    2016-06-14 16:00:49
    Petaluma, California, United States
    1
    9,900.00
  • 2008 Custom Built Motorcycles Bobber2008 Custom Built Motorcycles Bobber (2008)
    How about a Custom Bobber? It was built by Union Cycle in Tucson AZ, in 2008. The make is "Union" on the clear Texas title.
    2016-06-14 16:00:35
    Amarillo, Texas, United States
    1
    12,500.00
  • 2013 Custom Built Motorcycles Bobber2013 Custom Built Motorcycles Bobber (2013)
    This is a professionally built, old school, rigid frame big twin bobber. It was built in 2013 and has a clean Colorado title. This wicked machine is loaded with power!
    2016-06-14 16:00:32
    Denver, Colorado, United States
    1
    15,500.00
  • 1974 Custom Built Motorcycles Bobber1974 Custom Built Motorcycles Bobber (1974)
    Yamaha 650 custom bobber. Professionally built using TC Brothers components, including frame, forward controls and most of the tins. Has cross laced powder coated wheels and period correct tires.
    2016-06-14 16:00:20
    East Peoria, Illinois, United States
    1
    4400
  • CUSTOM BOBBER 200MM SHOW WINNING PRO HOT ROD STREETROD NEW CRUISER 26CUSTOM BOBBER 200MM SHOW WINNING PRO HOT ROD STREETROD NEW CRUISER 26" FRT TIRE (2014)
      RODS & RIDES MOTORCYCLE COMPANY Saint Louis, MO USA   2014  200mm DROPSEAT  BOBBER      MSRP $29,995     TERMS OF SALE: This machine is ready to go and can be headed your way today, shipping is included or you can pick it up in person.   -200mm Paint: House Of Kolor Paint with Old School Pinstriping -Springer Front End   -Fat Spoke Wheels STD Frt. 26” Front W/ Whitewall and 18" Rear W/ 200mm Tire   -28 Ford LED Taillight    -Leather Seat Hand Made By World Famous Rich Phillips   -Murdered Package (Includes, Rocker Boxes, Headlight, Taillight, and primary drive)   -2 1/2" RR Exhaust W/ Black Wrap   -Engine: Ultima El Bruto Compition 140” 2305cc 175HP   -6 Speed LSD Transmission Black W/ Hydraulic Clutch - 12” Ape Hanger Style Bars Color Matching   -Primary 2” BDL With Outer Cover Contrast Cut -JB Quad Front Brake System All motorcycles carry a 1 year/unlimited millage parts warranty.
    2013-10-22 00:22:44
    Saint Louis, Missouri, US
    1
    29,995.00
  • CUSTOM BOARDTRACK BOBBER OLD SCHOOL RACER SHOW WINNING PRO HOT ROD STREETROD NEWCUSTOM BOARDTRACK BOBBER OLD SCHOOL RACER SHOW WINNING PRO HOT ROD STREETROD NEW (2013)
           Rods & Rides Motorcycle Company This sale is for a new 23" Boardtrack Racer Motorcycle order. The order will be ready for delivery within 6-8 weeks.  The motorcycle can be either delivered at our facility or shipped anywhere within the United States for $595.00 We are the only Drop Seat Bobber manufacturer licensed in all 50 states including New Jersey. We are also able to export to Canada and we are on the Australian registry.
    2013-10-21 00:15:37
    Saint Louis, Missouri, US
    1
    28,950.00
  • CUSTOM DROP SEAT HOT ROD PRO SHOW STREETROD MOTORCYCLE FULL SUSPENSION SWING ARMCUSTOM DROP SEAT HOT ROD PRO SHOW STREETROD MOTORCYCLE FULL SUSPENSION SWING ARM (2014)
     RODS & RIDES MOTORCYCLE COMPANY - R O L L I N G  C H A S S I S - This auction / sale is for a complete bike minus Engine, Exhaust, Transmission, and Primary. That means, everything else is ready to go... Painted, Lights, Foot & Hand Controls, Bars, Brakes, ETC SALE DOES NOT INCLUDE DRIVETRAIN CAN BE SOLD COMPLETE, CALL FOR DETAILS The "Anarchy Bobber" is a newest model and features some of the most advanced technology we have offered in the Drop Seat Bobber line up.
    2013-10-21 00:15:37
    Saint Louis, Missouri, US
    1
    9,995.00
  • choppers inc billy lane built motorcycle bobber shovelheadchoppers inc billy lane built motorcycle bobber shovelhead (1983)
    Custom built bobber by Billy Lane of Choppers Inc. Custom frame, 1983 FXWG shovelhead with S&S Super E carb, electronic ignition, RevTech 4 speed transmission, custom finned oil tank, custom leather choppers inc seat, custom sissy bar, custom springer front end made by Boyd customs, custom handlebars with internal throttle, Fat Daddy wheels 21 & 16", Coker tire, Performance Machine hand controls and calipers, Jockey shift foot clutch, Custom exhaust, hand made headlight from billet aluminum, mid control foot controls, belt drive. MANY hours of fabrication work!
    2013-10-14 00:04:38
    Scottsdale, Arizona, US
    1
    7,000.00
  • 2010 Indian Larry 2010 Indian Larry "Tribute" Bobber (2010)
     2010 Indian Larry Tribute Bobber: PYROMANIAC Hand built custom which took over 820 man hours. Built on frame #17 of the legendary “twisted down tube” frames built by Indian Larry. Only 1 mile!
    2013-09-27 23:51:36
    Salt Lake City, Utah, US
    1
    21,211.00
  • suicide bobbersuicide bobber (1975)
    custom bobber built to cruise and look cool major head turner. many hiding detailed touches. the frame is backhalfed professional done including paint and powder coat.
    2013-09-03 17:42:23
    Little Chute, Wisconsin, US
    1
    2,500.00
  • CUSTOM DROP SEAT BOBBER FAT TIRE 330MM SHOW WINNING PRO HOT ROD STREETROD NEWCUSTOM DROP SEAT BOBBER FAT TIRE 330MM SHOW WINNING PRO HOT ROD STREETROD NEW (2013)
           Rods & Rides Motorcycle Company This sale is for a new 330mm Drop Seat Bobber Motorcycle order. The order will be ready for delivery within 4-6 weeks.  The motorcycle can be either delivered at our facility or shipped anywhere within the United States for $725.00 We are the only Drop Seat Bobber manufacturer licensed in all 50 states including New Jersey. We are also able to export to Canada and we are on the Australian registry.
    2013-09-27 00:56:10
    Saint Louis, Missouri, US
    1
    27,950.00
  • 2008 Custom Built Motorcycles Bobber2008 Custom Built Motorcycles Bobber (2008)
    Custom Old Skool Bobber 2008 Up for sale is a 2008 Bobber Hard Tail Kraftech Frame with a 34 degree on the neck 2" stretch on the back bone, with Black Powder Coat. Power is delivered by a Rev Tech 110" backed by a Baker 5 Speed Trans, Left side Chain Drive PM Sprocket, Brakes Calipers, Foot and hand controls are also PM products. Custom Mikuni Carburetor and a Hooker Header with Titanium heat wrap.
    2016-12-17 04:40:58
    North Babylon, New York, United States
    2
    14,000.00
  • 2015 Custom Built Motorcycles Bobber2015 Custom Built Motorcycles Bobber (2015)
    New build by Lock Jaw Customs with HAMMER Performance motor.  VERY fast VROD destroyer.  These guys only build one to two bikes a year so the attention to detail is incredible.
    2016-10-22 04:44:14
    Parker, Colorado, United States
    2
    9500
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    Custom Harley-Davidson Evo Motor Bobber by Stevensons Cycles,(Steve Broyles -Owner/Builder: 734 641-2200 any questions, contact Steve, he is more than happy to answer all questions about this custom build he created! Motor: Evo 80 CI/With custom Cam/Trans-6 speed/Chrome Springer Front End! Custom seat/ Bobbed rear fender/Chrome Sissy Bar/Tear drop Gas Tank....SEE PICTURES FOR FULL VALUE
    2016-10-05 04:45:57
    Mountain View, Arkansas, United States
    2
    14,440.00
  • 2011 Custom Built Motorcycles Bobber2011 Custom Built Motorcycles Bobber (2011)
    Up for Sale is a 2011 Sally Sucker Punch Roller. I removed: Wiring Harness Engine/Trans/Chain/Sprocket Battery Forward and Hand Controls Brakes Any Questions Call or Text 717-736-9984
    2016-08-03 04:57:14
    Jonestown, Pennsylvania, United States
    2
    10000
  • 2010 Custom Built Motorcycles Bobber2010 Custom Built Motorcycles Bobber (2010)
    selling a custom bobber from billy the kid customcycles, has a 2010 missouri spec contruction title (clear) bike has maybe 2000 miles on it, transmision is out and needs repaired or relaced. has a 110 revtec exotic motor to look like a knuckle head. has a 3 inch open beltdrive that will come with it.
    2016-07-31 04:55:32
    Saint Louis, Missouri, United States
    2
    23000
  • 2005 Custom Built Motorcycles Bobber2005 Custom Built Motorcycles Bobber (2005)
    This bike is simply awesome to ride. Recent service done on this bad boy.  Details are a hand tooled leather seat, Harley Davidson Controls, Harley Fatboy front end, 220 rear tire, custom metal, Ultima 6 speed, 4 inch open primary belt drive, HUUUUGE 130 inch Ultima engine that purs like a kitten.
    2016-06-18 05:00:58
    Pompano Beach, Florida, United States
    2
    6700
  • 2012 Custom Built Motorcycles Bobber2012 Custom Built Motorcycles Bobber (2012)
    I have a 2012 bobber for sale that was built by Capones Customs out of  Shelbyville Indiana. Has a 107 ultima motor with 6 speed ultima tranny. Very low hours!!
    2016-06-16 05:06:08
    Toledo, Ohio, United States
    2
    12616
  • 2013 Custom Built Motorcycles Bobber2013 Custom Built Motorcycles Bobber (2013)
    Smooth, low and fast... this is a custom build 2013 Harley Soft Tail Bobber, 4.5 stretch mono shock has a 1978 xs650 Yamaha engine that is completely redone top and bottom with 277 rephrase crank and cam. 38 carbs with air pods, electric and kick start.
    2016-11-20 04:53:31
    Trafford, Pennsylvania, United States
    3
    4,850.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
    Fresh build. Donor bike was a 94 XL 1200 with 3943 original miles. Have built a few of these over the years, mainly for the therapeutic garage time.
    2016-11-07 04:41:54
    Hurst, Texas, United States
    3
    27820
  • 2005 Custom Built Motorcycles Bobber2005 Custom Built Motorcycles Bobber (2005)
    Up for auction is a beautiful custom bobber. This bike is a 2005 Suzuki S40 that has been converted into a hardtail bobber this past year. I bought this bike as a stock S40 in October 2015 with 3600 miles.
    2016-10-24 04:44:05
    Kingston, Rhode Island, United States
    3
    14000
  • 2007 Custom Built Motorcycles Bobber2007 Custom Built Motorcycles Bobber (2007)
    Up for sale is a Grandure Cycle (Mike Phillips) bad ass bobber.This bike is a head turner and a blast to ride. It's got a revtech 100ci motor with compression releases. Joker controls.
    2016-10-13 04:44:11
    Holyoke, Massachusetts, United States
    3
    13,000.00
  • 2000 Custom Built Motorcycles Bobber2000 Custom Built Motorcycles Bobber (2000)
    REDUCED  again ! This Bike Has the BEST of the BEST All Surfaces are Powder Coated, Painted or Chromed The bike is a blast to ride it weighs less than 400lb and has 111hp on the back wheel.   Power Train 113 S&S Super Stock Sidewinder D port heads Power House 620 Cam Rated @118hp Dynoed @111hp Rear wheel Crane Single Fire Ignition Belt Drive LTD Clutch and Primary Drive Jims 6 Speed Transmission (tall 1st and 6Th overdrive) Ceramic Coated Exhaust   Chassis Daytec 103+ 180 Chrome Moly Frame,  Billet Engine /Transmission Mounts  (very strong very light) STORZ CERIANI HD55 Inverted Front Suspension Progressive Rear Suspension Arlen Ness Chrome plated aluminum rims stainless steel spokes 18 Front &17 Rear  W/Billet Hubs Dual Front/Single Rear Performance Machine Rotors and Calipers Jesse James Foot Controls   Electrical Dakota Digital Speedometer Wire Plus Main Harness Self-cancelling HD turn signal module BadLands Illuminator Turn Signal Module Makes Turn Signals Running Lights and Brake Lights Joker Tail Light/Plate Mount (sideways) 3hp Terry Starter Mike Milburn repainted the new sheet metal about 8 years ago (400miles ago) with gold leaf in the paint and gold plated plumbing on the carb.
    2016-10-09 04:42:44
    Houston, Texas, United States
    3
    10,750.00
  • 2005 Custom Built Motorcycles Bobber2005 Custom Built Motorcycles Bobber (2005)
    CUSTOM BUILT RAD BOBBER WITH THE S&S SIDEWINDER MOTOR. THIS RIGID FRAME CUSTOM HAS EXCESS AMOUNT OF POWER AND EQUAL AMOUNT OF BREAKING WITH LARGE DISC SETUP FRONT AND REAR. THIS S&S MOTOR IS AT LEAST 107" AND MAYBE 113" AND IS SUPER STRONG...
    2016-08-22 04:54:19
    Houston, Texas, United States
    3
    22000
  • 2009 Custom Built Motorcycles Bobber2009 Custom Built Motorcycles Bobber (2009)
    Up for sale is my custom 2009 bobber.  This is a kit bike by Southern Motorcycle Works which sells for $11k new. It's a hardtail with a 100" ultima v twin, ultima 6 speed transmission with a BDL 3" open belt drive.  Springer front end, disk brakes front and rear, no gauges.
    2016-08-22 04:54:09
    Lake Stevens, Washington, United States
    3
    5,800.00
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    Covington speed demon hardtail bobber with chrome springer front end,114ci polished TP engineering motor,Baker 5 speed transmission & BDL belt drive.Motor puts out 113hp & 121ft.lbs torque,makes over 100ft.lbs of torque at 1700rpm.Bike has under 3200 miles on it & is in excellent condition except for some paint failure around the gas cap.These bikes came with a sportster style gas cap that vented from the underside onto the paint,it has been replaced with a covingtons tri-bar spinner cap that is vented on top to prevent this from getting any worse.The bike is VERY fast & not for newbie riders,it gathers an insane amount of attention where ever it goes.These do not come up for sale often & I looked a long time before finding this one,I am offering this at a very low opening bid because I have an opportunity to buy a car that I have always wanted from a friend of mine,so I am only going to list this a couple of times & if it doesn't sell I will gladly keep it.
    2016-08-16 04:58:09
    Gardnerville, Nevada, United States
    3
    24000
  • 1996 Custom Built Motorcycles Bobber1996 Custom Built Motorcycles Bobber (1996)
    1996 Harley Davidson Custom Bobber Great looking custom bobber.  I did not originally build this bike, but did take it down to the frame, and re-build it back to what you see, after I acquired it. The frame is now a rigid sportster, which was stripped and powder coated. The tins are also all powder coated the same color as the frame, which is a dark cherry color.  I do have a front fender, to go with the bike, just dont have it on in the pictures.
    2016-07-30 04:57:06
    Bradenton, Florida, United States
    3
    7,300.00
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    For sale 2006 custom built bobber, clean bike low miles, always garage kept, never dropped or wrecked, small paint chip out of the front fender little discoloration on the pipes few nicks on the two front forks, average wear and tear on a 10 year old bike. Bike looks good and runs great with a 110 cubic inch Rev Tec engine. Straight short exhaust pipes so it's a little bit on the loud side.
    2016-07-21 04:56:56
    Springdale, Arkansas, United States
    3
    9,500.00
  • 2013 Custom Built Motorcycles Bobber2013 Custom Built Motorcycles Bobber (2013)
    Any question feel free to call/text 713-859-1987.  2013 Bobber, Pro Built, Redneck EngineeringFrame: Redneck Engineering Mutant Name: Bob This Engine: Buell S1 White Lighting 1203 cc Engine Color: OD green and Gloss Black Paint (military style).  Check out redneckengineering.com and you will see the base price on this bike is $22,995.00 with no options or upgrades like I have below. Many custom parts on the bike were built only for this bike. This is a very cool bike and gets attention every time it hits the street. 105 hp and light weight for a chopper so its fun to ride.
    2016-07-03 05:00:48
    Cypress, Texas, United States
    3
    33000
  • 2009 Custom Built Motorcycles Bobber2009 Custom Built Motorcycles Bobber (2009)
    2009 Detroit Bob are made by Percision cycle works custom paint overall condition of bike is it 9/10 250 rear tire Primo Riviera six speed primary S&S super carb great bike great shape hard tail with springer front end. 88 ci evo 
    2016-06-20 04:59:53
    Gamaliel, Arkansas, United States
    3
    9,000.00
  • 2005 Custom Built Motorcycles Bobber2005 Custom Built Motorcycles Bobber (2005)
    I am selling my Old School Cool Sucker Punch Sally Shovelhead Bobber.   It is a Bar Burner with small peanut tank that has around 2 gallons capacity.    She originally sold for around $ 24,500.00 when new.
    2016-12-13 04:41:50
    Picayune, Mississippi, United States
    4
    16,000.00
  • 2007 Custom Built Motorcycles Bobber2007 Custom Built Motorcycles Bobber (2007)
    I have too may bikes and toys so its time to let this one go.  Its a rigid bobber with a Pughco frame.  I made custom air bags under the seat so you get the look and ride of a rigid but it cruises and goes down the road soft and smooth. Has a 88 cu in revtech, its the updated one so no problems there.  Just had the paint done with a pearl green metallic over 20 coats of paint, the pics don't do it justice. The shifter is custom made and is out of 316 polished stainless,  also custom made clutch pedal.  Has a Jaybrake billet master and Brembo brakes.
    2016-10-10 04:43:05
    Lake Oswego, Oregon, United States
    4
    9,800.00
  • 2008 Custom Built Motorcycles Bobber2008 Custom Built Motorcycles Bobber (2008)
    I'm selling my 2008 Custom built Bobber, It has a Kraft Tech frame, Rev Tech 1650 with baker 5sp trans, Head work with custom cams, performance clutch, custom Mikuni carb, Performance Machine brakes, Springer front end, Etc... Bike is in great shape and runs like a beast!!!! Bike is a real head turner and has been featured in multiple Write ups.
    2016-10-05 04:45:51
    Bethel, Connecticut, United States
    4
    8,500.00
  • 2014 Custom Built Motorcycles Bobber2014 Custom Built Motorcycles Bobber (2014)
    AZautorv.com 320 S El Dorado Suite 4, Mesa, AZ 85202 888-621-8889 2014 Johnny Pag Ventura VINL8YPDRLG7EY000118 ConditionUsed Mileage4 Fuel TypeGasoline TransmissionManual 5-Speed Exterior ColorRed Stock Number000118-1 Address: 320 S El Dorado Suite 4 Mesa, AZ 85202 View Map Phone888-621-8889 This eBay Listing Template is created by Carsforsale.com. Call 1-866-388-9778 to find out how Carsforsale.com can service your dealership.
    2016-07-17 04:53:48
    Mesa, Arizona, United States
    4
    1,899.00
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    I'm listing this motorcycle for a friend, and storing/showing in our showroom.  Concord Trailer World -Polaris 1124 Caven Way Concord Concord, CA 94520 and/or Concord Garden Equipment 2451 Monument Blvd Concord, CA 94520 925-682-9777 Call and talk to Kevin or Mike  Originally Featured in Easy Rider Magazine in 2007 as well. If it's not painted or powder coated than it's been nickle or brass plated. Every single piece of this motorcycle was meticulously though after and kept up.
    2016-07-01 04:57:37
    Concord, California, United States
    4
    16,990.00
  • 2002 Custom Built Motorcycles Bobber2002 Custom Built Motorcycles Bobber (2002)
    I am selling a 2002 Honda Shadow 600 bobber. Has a clean title. 4800 miles.
    2016-06-14 16:00:44
    Flushing, New York, United States
    4
    4,500.00
  • 2016 Custom Built Motorcycles Bobber2016 Custom Built Motorcycles Bobber (2016)
    Custom built bicycle with a 48 cc engine. One of a kind frame with 3 year warranty.  Max speed of 55 MPH.- Front and rear fenders- 7/8 Gallon gas tank- LED Headlight- Springler suspension- 4 Stroke automatic motor- 2 HP - Ignition by pull starter - Mechanical disc brakes 
    2016-10-06 04:43:48
    Miami, Florida, United States
    5
    2,500.00
  • 1999 Custom Built Motorcycles Bobber1999 Custom Built Motorcycles Bobber (1999)
    1999 custom yamaha vstar 650 bobber/cruiser, powder coat wheels, pipes,tank, custom seats. back seat comes with the bike runs great. for sale as is.
    2016-08-27 04:51:47
    Union City, New Jersey, United States
    5
    4,500.00
  • 2006 Custom Built Motorcycles Bobber2006 Custom Built Motorcycles Bobber (2006)
    BIG RED Harley Davidson late model Springer front endHarley Davidson 80 cubic inch evolution motor Harley Davidson 5 speed gear setHarley Davidson hand controlsCV carbK&N air filter Perf-form oil cooler & filter Vance & Hines Pro Pipe modified and ceramic coated JIMS transmission polished aluminum case5 speed kicker conversionBDL 3" belt driveAir Ride seat with on board compressorHarley Davidson police seat 23"x3.75" 60 spoke front wheel Avon Venom-R 130/60R23 tire18"x8.5" 60 spoke rear wheel Avon Venom-R 250/40R18Performance Machine chrome 4 piston rear brake caliper Harley Davidson Springer front brake 12" custom Stainless Steel Apes 250 series frame powdered coated gloss black 5 plus gallon fat bob gas tanks Paint candy red with underlying ghost flames on tank and rear fender Springer painted to match Dyna S electronic ignition Dyna S matching coilBike has title  Bike will come with complete wiring diagram along with starting instructions  Fast and Fun riding rigid, the air ride makes for a smooth ride, have other bikes that need finishing, has been my primary bike for the past 8 years, turns heads everywhere I go. Stand out and have something a bit different from the rest.Everything used to build this bike was and is qualityIf you are still reading then well you know.Happy bidding and please tell your friends Thanks and keep the shiny side up  Built and fabricated in the USA Will help with shipping arrangements 
    2016-08-11 04:59:29
    North Branch, Minnesota, United States
    5
    24000
  • 2009 Custom Built Motorcycles Bobber2009 Custom Built Motorcycles Bobber (2009)
    2009 custom bobber,this bike has a 96 Harley ,1200 Evo motor with Buell generation 1 heads.Harley 5 speed tranny.she's mounted on a 09 fly rite bobber frame.s&s shorty carb,mini apes,with Bidwell grips.custom 105mm anti aircraft shell for a oil tank!oil cooler, new tires.beautiful root beer paint by house of colors.fast,fun bike,call with any questions, thanks 941-380-1793
    2016-08-05 04:55:46
    North Port, Florida, United States
    5
    9500

Bobber Bobber Price Analytics

Moto blog

2012 Headbanger Motorcycles Lineup – First Ride Impressions

Mon, 30 Apr 2012

Our European correspondent Tor Sagen was invited to test the 2012 offerings from Italy-based Headbanger Motorcycles. Headbanger offers six different models, some of which available in a couple of variants. Tor shared with us some of his first impressions of Headbangers 2012 range.

2012 Harley-Davidson Seventy-Two Revealed in CARB Documents; Softail Slim Bobber Also Rumored

Tue, 31 Jan 2012

Harley-Davidson will introduce a new 1200cc Sportster model released by the California Air Resources Board. The new 2012 Harley-Davidson Seventy-Two is expected to be announced at the company’s winter dealer meeting next month, and it may not be alone. Newly released documents from the CARB reveal the Harley-Davidson Seventy-Two among the company’s 1200cc Sportster offerings alongside the Forty-Eight, 1200 Custom and Nightster.

A New Bobber From Victory?

Thu, 01 Dec 2011

On its Facebook page today, Victory motorcycles released a teaser video for an upcoming model to be unveiled December 9 at 7pm CST. The video is a brief 43 seconds that begins with the sound of spray paint being shaken and black paint being “sprayed” onto the camera. What follows is a montage centered around pinstriping and boulevard attitude, as the video sequences between scenes of a man applying pinstripes to what presumably is Victory’s new model and POV shots of this machine rolling down a typical avenue.

14,795 for a one-off Harley Sportster

Wed, 15 Dec 2010

A UNIQUE Harley-Davidson motorcycle – the only one in the UK – has been created by a Scottish dealership. Glasgow-based West Coast Harley-Davidson’s customised Bobber style XL1200 Nightster screams style and individuality, with a Harley-Davidson Factory Radical Paint set and a host of added accessories. Named Devil’s Infantry, the paint kit on the striking machine is one of just five across Europe, Africa and the Middle East.

The Harbortown Bobber DVD Review

Fri, 22 Jan 2010

On the surface, The Harbortown Bobber by One World Studios Ltd. is a documentary about the build/restoration of a bobber bike owned by Scott Di Lalla, co-founder of One World, and co-producer/co-director of Harbortown. However, what I took away from the 75-minute DVD was that the film is less about the skeletal remains of a 69/71 Triumph rising from the ashes, and more about the people (characters in a film for sure!) that help Scott along the way to realizing his dream of breathing life into a bobber of his own.

The Harbortown Bobber

Tue, 09 Jun 2009

The first release from One World Studio, Choppertown: The Sinners, is a documentary film about garage-built motorcycles that also follows the renowned hot rod and motorcycle club the Sinners. The second release, Brittown: A British Motorcycle, documents legendary underground mechanic and Britbike connoisseur “Meatball” from the Hell On Wheels bike shop in Anaheim, CA. The latest release by award winning directors, Scott Di Lalla and Zack Coffman comes, The Harbortown Bobber, which was two years in the making will be released in July 2009. For more info on how to purchase a DVD and for film updates, go to the site. Check out all three trailers after the jump.

Mac Motorcycles

Thu, 28 May 2009

British motorcycle design studio Xenophya Design and product designer Ellis Pitt have teamed up to produce a new company, Mac Motorcycles. Based out of Upton-Upon-Severn in Worcestershire, England, Mac Motorcycles will produce a line of bikes powered by Buells air-cooled single cylinder 492cc engines used in the Blast, with a tubular backbone frame. On the companys website, Pitt describes its bikes as being simple to maintain, include references and details from choppers and bobbers and feature Harley posture, flat-track manners, Ducati handling.

2040Motos.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Motos User Agreement and Privacy Policy.

0.078 s, 4823 u