Find or Sell Motorcycles & Scooters in USA

1999 Honda Elite Scooter on 2040-motos

$600
YearYear:0 MileageMileage:555
Location:

Rogers, Minnesota

Rogers, MN
QR code
1999 Honda Elite Scooter, $600, image 1

Honda Other description

1999 Honda Elite with 555mis. Recently had a tune up and has been sitting in a climate controlled garage since. Runs and drives well. Asking $600 obo. For more info email or call (612) 719-XXXX

Moto blog

K-Tech release 25SSK for Big Piston Forks

Mon, 21 May 2012

K-Tech have released their popular 25SSK front fork open cartridge system to fit all Showa Big Piston Forks. Here's what K-Tech have to say about them: These lightweight aluminium units are supplied to the same exacting specification as all other 25SSK fitments with 14mm piston rods and a 25mm cartridge tube, the 14mm piston rods displace a large volume of oil through the 25mm control pistons giving enhanced damping characteristics over the standard Big Piston Fork and allow a bigger volume of air for a more precise feel at the bottom of the fork travel. The cartridge kits have compression and rebound adjustment in both legs and are supplied with 1.5mm Flow Control Valves for a more accurate adjustment, all necessary hardware is supplied to convert the Big Piston Forks to take the cartridges but it is necessary to order the springs you require as these are not included, customer price for the 25SSK cartridges is £725.00 + VAT and are available for the following models:- Honda CBR1000RR 2012 Kawasaki ZX6-R 2009-2012 Kawasaki ZX10-R 2011-2012 Suzuki GSXR600 2011-2012 Suzuki GSXR1000 2009-2012 Contact K-Tech on: +44(0)1283 559007.

Honda Recalls Small Number of the 2010 NT700 for Incorrect Tire Specs Label

Thu, 10 Nov 2011

  On October 27, 2011, Honda filed a recall campaign with the NHTSA (campaign ID number: 11V526000) involving the 2010 model-year NT700. The recall is for a swingarm-mounted label that displays incorrect tire size and inflation information. The 120 affected models were manufactured Nov.

Electric Motorcycle Conversion [video]

Fri, 30 Jul 2010

If you were ever curious how to convert your smelly, noisy and dirty gas powered motorcycle into a quiet and zero emissions electric motorcycle then you have to check this video out from GomiStyle.  They take an old Honda Rebel 250 and customize the frame to accommodate the electric motor and batteries, they claim the conversion should take about two to three days to complete, the batteries will take about 5-8 hours to charge and will give you a top speed of 45 mph. Here is a link to the step-by-step instructions, check out the video after the jump. The GomiCycle – An Electric Motorcycle Conversion from Media Sapien on Vimeo.