Triumph "blackbird" Custom Drag Bobber Bonneville Thunderbird. on 2040-motos
Triumph Other tech info
Triumph Other description
It’s a long story but I’ll try to make it brief.. First, a bit of history. I have 20 years experience in motorcycle
design and engineering. I still work as a designer, although not in the motorcycle industry
anymore. So the bike: I owned it 21 years ago and built it into a Sportster looking roadster.
I didn’t include a photo because frankly it’s a bit embarrassing. The build was
very nice but good grief! Looking back it was bloody ugly! Anyway, I sold it to a guy out of state who’s dad once owned a Triumph
dealership and that was the end of that, or so I thought! Some 19 years later I get this bug to build another Triumph, this time a “Drag Bobber” but
based on the old 1950’s Thunderbirds nicknamed the “Blackbirds” by the American
buyers. I looked around on the net and all the usual holes for a donor bike for
about 2 weeks, then, Low and behold, here comes my old Triumph on Craig’s list,
1 mile down the street, as
if.. offering itself up.. or something!! Very weird! About 18 months later thousands in paint and bits and the “Blackbird”
is born! I really can’t describe in any detail the amount of work that went into
this bike but the photos should lead you to believe, it’s a lot! I did include a brief build detail and I have 100 photos of the full
build thread for the lucky buyer. Needless to say, everything is either brand new or completely
refurbished. I wanted the bike to have a very low and stretched stance but resemble
a true early 50’s chop. Hence the hard tail, full rear fender, gator forks, and
genuine 50’s tank badges. You’ll notice all the bad things about the 70’s
Triumphs are deleted in this build. Poor quality, and high/short ride stance don’t exist in this animal. Also, unlike most of the old Triumph builds I see, I lengthened and re-positioned
the foot pegs and foot controls so you can actually sit on this thing and ride
it without looking like a gorilla on a moped! With the total engine rebuild, 750 big bore kit, PWK carbs, and magnet
trigger ignition, she fired up 3rd kick, and she runs lovely! (If
not wee bit loud) You’ll notice many of the custom brackets and the wheel hubs are
drilled for that cool racing look, juxtaposed to the obvious old street bike
roots. That’s the look I was going for and every where it goes, I need at least
an hour for the impending chat with some other biker that always ensues. (That’s cool though) Why would I sell it you ask? Bloody good question! Truth is, for me it’s
really about the design and the build, and another project beckons. So, I’d sooner someone out there, who maybe doesn’t have the ability,
or tools, or inclination, enjoy this bike rather than it sit in my garage. This is definitely not your average custom Triumph, It has some of my
past, lots of my passion, and more of my blood, sweat, and dollars that I care
to remember. Look carefully at the detail in the photos and bid with confidence then
take her to a good home.! I have a nice 7 minute video of the bike running and on the road with some detail footage but I can't get it linked to the ad yet. When I can I will link it to the ad but you can contact me and I'll give you the You Tube address for the Video..
Cheers, and thanks for looking! C.
TRIUMPH “BLACKBIRD”
Compressed
Build Detail
1: Motorcycle completely stripped
including motor, forks, wheels, brakes, wiring, and all ancillary parts.
2: Motor cases stripped of all bearings
and seals, bead blasted and powder coated.
3: Frame: Rear section removed and 6
inch over hard tail installed (Welded)
4: All custom brackets fabricated and
tacked to frame for pre construction.
5: Empty engine cases and barrels assembled
in frame for pre con.
6: Front fork trees raked 6+ degrees,
forks basically assembled for pre con.
7: Both wheel hubs painted, new
bearings, rims powder coated, (Rear 16 inch) Re assembled with stainless spokes
and new tires.
8: Footrests, side stand, brake pedal,
gear shift, seat height, all adjusted and lengthened for optimum seating/riding
position.
9: Exhausts, battery & ignition
case, handlebars, rear mudguard, frame struts, etc all fabricated.
9: All other ancillary items
manufactured and positions set.
10: Ride height adjusted and all parts
disassembled.
11: All frame parts and engine cases
powder coated as necessary.
12: Frame and engine cases thoroughly
washed and prepped for assembly.
13: All new steering bearings and chrome
fastenings, etc installed, wheels fitted with new brake shoes and springs.
14: Forks reassembled with new seals,
oil, and chrome fastenings and installed with both wheels.
15: Engine reassembled with new
big/small ends, valves, springs/guides, (Head ported and bead blasted) new pistons
barrels (750 Big Bore) clutch plates, stator and rotor, primary chain and outer
clutch wheel, shock absorbers, Final drive sprocket, gaskets, new PWK carburetors,
magnet trigger ignition.
16: Engine installed with new
fastenings, carbs, exhausts, custom billet caps, new oil lines all installed.
17: Complete new wiring loom custom made
for new specs.
18: Original Gas tank, stripped soldered
and sealed. Strap brackets fitted to bottom and custom brackets installed to
accept the 1950 “Blackbird” Tank badges.
19: Gas tank and rear fender painted in
Dodge Viper metal black with Porsche arctic silver stripe and custom mixed
burnt orange stripes.
20: All remaining parts installed, new
gel battery, new horn, new cables, custom battery/ignition box, sprung leather
seat.
WAY TOO many other small 4-10hr details
to list but I have 100 photos of the complete build.
Finally:
Engine oiled and tank filled with gas.
THIRD kick, she lives!
C.
Triumph Other for Sale
- 1970 cheney triumph 650 isdt vintage enduro. extremely nice original bsa ahrma(US $8,500.00)
- 2007 triumph speedmaster book value is 5,295 speed master(US $5,288.00)
- 2012 triumph speedmaster base used(US $6,440.00)
- 2013 triumph scrambler standard (US $8,799.00)
- 2013 triumph scrambler sportbike (US $8,799.00)
- 2013 triumph america - two-tone color cruiser (US $8,599.00)
Moto blog
David Beckham Rides Custom Triumph Bonneville into Amazon Rainforest
Tue, 10 Jun 2014After 22 years on the soccer field, David Beckham took on a new challenge in the form of the Amazon rainforest. To accomplish this task, he needed three things: some friends, a documentary film crew, and a custom-builtTriumphBonneville. There are nobbies under all that mud.
Go camping with your bike
Thu, 05 Jul 2012Keep your bike close to you when you go camping with the MOTOTENT from motorcycle adventurers Lone Rider. Priced at £450, here's a round-up of the features from Lone Rider: The MOTOTENT is spacious enough to shelter a dual sport bike as big a BMW R1200 GSA with all its luggage, to have room to work on it, and to be able to stand in the tent. The tunnel-shaped design allows a very quick setup of the tent when needed.
2012-2013 Triumph Speed Triple Transmission Recall Now Includes US
Fri, 31 May 2013As we expected, the National Highway Traffic Safety Administration has announced a recall for the 2012-2013 Triumph Speed Triple because the transmission may have been built with the wrong detent arm spring. A similar recall was announced for Canada earlier this month, so we knew it was a matter of time before the recall was announced for the U.S. market.
Triumph Other by State
| Triumph Other by City | Triumph Other by Color
|