-
2014 Custom Built Motorcycles Pro Street (2014)
MotoGP Brembo carbon ceramic motorcycle rotors. Brand new!
2016-10-23 04:43:21
Fremont, California, United States
0
46000
-
2016 Custom Built Motorcycles Pro Street (2016)
MALIBU MOTORCYCLE WORKS 818-300-4299
. CALL US , OR E-MAIL US ANYTIME
ALL OF OUR FRAMES COME WITH 17 DIGIT VIN NUMBERS STAMPED IN THE FRAMES AND A MSO'S (MANUFACTURE STATEMENT OF ORIGIN) THAT ARE FEDERALLY APPROVED
WE SHIP WORLDWIDE AND TAKE CARE OF ALL THE EXPORT DOCUMENTATION
WE STOCK 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 ADDITIONAL FRAMES TO BUILD ROLLING CHASSIS THAT WE CAN MAKE INTO A E-BAY AUCTION FOR YOU
WE STOCK OVER OVER 10,000 PARTS IN OUR WAREHOUSE WITH A WIDE VARIETY OF PARTS FOR A ROLLING CHASSIS OR ANY BIKE PROJECT YOU ARE WORKING ON ,THAT WE CAN MAKE INTO A E-BAY AUCTION FOR YOU
PLEASE READ: TAKE A GOOD LOOK AT THE PRODUCT WE ARE SELLING . IF YOU ARE ON E-BAY LOOKING AT OTHER AUCTIONS , YOU WILL SEE THAT WE SELL SOME OF THE BEST ROLLING CHASSIS AND KIT BIKES IN THE WORLD .
2016-07-19 04:50:43
Thousand Oaks, California, United States
0
13,000.00
-
Custom Built Motorcycles : Pro Street MMW AMERICAN HOLESHOT (0)
MALIBU MOTORCYCLE WORKS 818-300-XXXX . CALL NOW , OR E-MAIL US ANYTIME ALL OF OUR FRAMES COME WITH seventeen DIGIT VIN NUMBERS STAMPED IN THE FRAMES AND A MSO'S (MANUFACTURE STATEMENT OF ORIGIN) THAT ARE FEDERALLY APPROVED WE SHIP WORLDWIDE AND TAKE CARE OF ALL THE EXPORT DOCUMENTATION WE STOCK 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 ADDITIONAL FRAMES TO BUILD ROLLING CHASSIS THAT WE CAN MAKE INTO A E-BAY AUCTION FOR YOU WE STOCK OVER OVER 10,000 PARTS IN OUR WAREHOUSE WITH A WIDE VARIETY OF PARTS FOR A ROLLING CHASSIS OR ANY BIKE PROJECT YOU ARE WORKING ON ,THAT WE CAN MAKE INTO A E-BAY AUCTION FOR YOU PLEASE READ: TAKE A ATTRACTIVE LOOK AT THE PRODUCT WE ARE SELLING . IF YOU ARE ON E-BAY LOOKING AT OTHER AUCTIONS , YOU WILL SEE THAT WE SELL SOME OF THE BEST ROLLING CHASSIS AND KIT BIKES IN THE WORLD .
2014-01-29 04:55:19
0
7,500.00
-
MMW AMERICAN HOLESHOT 300 REAR , 26 FRONT PRO-STREET SOFTAIL ROLLING CHASSIS (2013)
MALIBU MOTORCYCLE WORKS 818-300-4299
. CALL US , OR E-MAIL US ANYTIME
ALL OF OUR FRAMES COME WITH 17 DIGIT VIN NUMBERS STAMPED IN THE FRAMES AND A MSO'S (MANUFACTURE STATEMENT OF ORIGIN) THAT ARE FEDERALLY APPROVED
WE SHIP WORLDWIDE AND TAKE CARE OF ALL THE EXPORT DOCUMENTATION
WE STOCK 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 ADDITIONAL FRAMES TO BUILD ROLLING CHASSIS THAT WE CAN MAKE INTO A E-BAY AUCTION FOR YOU
WE STOCK OVER OVER 10,000 PARTS IN OUR WAREHOUSE WITH A WIDE VARIETY OF PARTS FOR A ROLLING CHASSIS OR ANY BIKE PROJECT YOU ARE WORKING ON ,THAT WE CAN MAKE INTO A E-BAY AUCTION FOR YOU
PLEASE READ: TAKE A GOOD LOOK AT THE PRODUCT WE ARE SELLING . IF YOU ARE ON E-BAY LOOKING AT OTHER AUCTIONS , YOU WILL SEE THAT WE SELL SOME OF THE BEST ROLLING CHASSIS AND KIT BIKES IN THE WORLD .
2013-10-20 00:20:26
Thousand Oaks, California, US
0
7,500.00
-
2005 chopper 113 s@s 6speed 240 rear tire (2005)
needs belt and paint chips in paint on rear fender, gas tank around filler has dent in oil tank. belt is missing teeth has air ride but compressor needs to be remouted as it is noisy. bike can be ridden but not far as to belt missing teeth.
2013-10-03 22:34:35
Santa Ynez, California, US
0
4,310.00
-
MGS Custom Bikes Triumph Rocket III (2006)
MGS CUSTOM BIKES: TRIUMPH ROCKET III
MGS Custom Bikes: TriumphMGS Custom Bikes: Triumph“When they uncovered the original bike that I drew to build for Metric TV’s build-off series, you can’t imagine the look of shock on my face,” said Mike Stafford of MGS Custom Bikes. “They told me I had 180 days to customize the bike and I’m going, ?What am I gonna do with that?’ ” So goes the first meeting between a Triumph Rocket III and Mike, but as you can see, he pulled it off and did such an amazing job of designing the Triumph Triple Threat that it makes you have to open the doors to your imagination and drink it all in. If you aren’t familiar with the Rocket III, let me give you a little background.
2013-09-26 22:45:33
Lancaster, California, US
0
5,000.00
-
2003 Custom Built Motorcycles Pro Street (2003)
Show Stopper! Kept in New condition! Not a Nicer Bike out there~ The Best of Everything!
2016-06-28 05:00:14
Stockton, California, United States
1
38000
-
2012 Custom Built Motorcycles Pro Street (2012)
This is NOT a Harley Davidson motorcycle. It is a custom built motorcycle with a clear California Special Construction title. It was built in the early 90's for a company then based in Connecticut called ACCEL Motorcycle Products to showcase their new Thundertwin Fuel Injection.
2016-11-07 04:42:06
Whittier, California, United States
2
9195
-
2007 Custom Built Motorcycles Pro Street (2007)
Time to sell this magnificent "Man Toy"
Our loss $$ your GAIN $$$
2007 Walz Hardcore Chopper/Pro Street
This is not your normal chopper or street bike. This is a custom built chopper/Pro street machine on a Walz (Germany) frame built by the creator of the drag style motorcycle frame and naming rights. WalzWerks motorcycles are made in Belgium and they are the prize possession of many Formula one race car drivers and many of the Go fast Hollywood crowd.
2016-07-17 04:53:54
Costa Mesa, California, United States
2
24379
-
2004 Custom Built Motorcycles Pro Street (2004)
2004 Wicked Image Custom Pro Street
Bike is one of a kind. Complete custom from ground up. Many many custom parts, wheels are one of a kind, frame is one of a kind custom.
2016-06-25 04:54:11
Long Beach, California, United States
2
39000
-
2006 Custom Built Motorcycles Pro Street (2006)
FOR SALE: 2006 BMC PRODUCTION CUSTOM BUILD MOTORCYCLE, ONLY 8000 MILES ORIGINAL HAS A REVTECH 100cc engine with MIkuni Carburetor, Lots of Chrome, Custom Paint, Spoke Rims with a 240 Rear Tire this bike has been garage kept and is in excellent running condition, asking $7500.00 or best offer, please contact us with any questions, Local Pick-Up Only
2016-06-23 04:57:51
Ventura, California, United States
8
7,500.00
-
Bad a$$ Pro Street Chopper (0)
2006 custom built PRO STREET CHOPPER. Soft tail with only 8k miles. Best of everything with no expense spared.
2014-01-22 04:22:27
8
17,500.00
-
2011 Pro Street Custom Built Motorcycle - Show Quality - High Dollar Build (2011)
2011 Pro Street Custom Built Motorcycle
Original Cost $45,000
Pro Street Frame
Custom $10,000 Paint Job
Edelbrock Engine Producing a lot of HP
Mukuni Carb
Custom Exhaust
Custom Chrome Wheels with Brembo Disc Brakes
Avon Tires
Fully Adjustable Rear Air Shocks
Boyce Open Belt Drive
Everything Chromed Out
You are looking at a one of a kind custom built Pro Street Motorcycle. This bike cost in excess of $45K new. It is in showroom condition with no expense spared.
2013-09-24 03:06:19
Vacaville, California, US
9
8,995.00
-
1983 Custom Built Motorcycles Pro Street (1983)
Selling my Yamaha virago 750.
Video: https://youtu.be/m5Oxksty44s
It is an awesome bike, I built it with my mechanic (I am a mechanical engineer and he has over 20 years with his shop). The idea was to build a naked modern bike, not a cafe racer necessarily but it get's close to that.
It is such a fun ride, it catches all the attention on the streets. People literally stop me to take pictures with it.
2016-11-07 04:42:10
Tarzana, California, United States
23
6,500.00
-
2006 Custom Built Motorcycles Pro Street (2006)
I purchased this complete kit in bare metal and then procedded to upgrade . S&S 124" , baker 6 speed , spyke inverted front end , colorado digital speed/gauge kit ( not installed , but comes new in pkg w/bike)spyke hi torqe starter , PM calipers lots of chrome and anodized parts . The bike only has 50 miles at most on it .
2016-06-14 16:02:54
Modesto, California, United States
25
27,000.00
-
Custom Softail (2013)
Ultima 100" Fatso engine, Ultima 6speed transmission, Billet forward controls, 250 Avon rear tire, Dellorto 2barrel racing carburetor, Digital speedo and tach. Many other custom features. Professionally built by Full Throttle Performance in California FTPDYNO.COM.
2013-09-05 15:34:25
67
12,900.00
-
2008 - Pro Street Custom Built Motorcycle (2008)
Up for your considerations is my pro-street custom.It is a full blown custom with no detail overlooked.
2014-07-12 14:44:55
San Diego, California, United States
100
7000
-
2004 Easyrider Show Bike w/less than 200 miles, custom tribal paint, NO RESERVE! (2004)
FEATURED IN THE OCTOBER 2004 EDITION OF EASYRIDERS
BUILT BY RIFF RAFF CUSTOMS
LOOK AT THESE SPECS... 113 CUBIC INCH DISPLACEMENT S&S MOTOR
112 HORSEPOWER
124 FT/LB TORQUE
6 SPEED TRANSMISSION
S&S CARB
K&N AIR FILTER
LA CHOPPERS CUSTOM PIPES
CRANE HI-4 FIREBALL IGNITION
PRIMARY DRIVE BDL
1999 ROLLING THUNDER FRAME & OIL TANK
INDEPENDENT GAS TANK
BLACK HOUSE OF KOLOR PAINT W/PLATINUM TRIBAL GRAPHICS
ARLEN NESS FRONT END
38 DEGREE RAKE
2 INCHES UP & OUT
HIDDEN SHOCK
CORBIN SEAT
PERFORMANCE MACHINE FRONT BRAKE & ROTORS
PERFORMANCE MACHINE REAR BRAKE & ROTOR
PERFORMANCE MACHINE FRONT 19" X 2.75" WITH METZELER FRONT TIRE
PERFORMANCE MACHINE REAR 18" X 8.5" WITH METZELER 240 REAR TIRE
PERFORMANCE MACHINE HANDLEBAR & FOOT CONTROLS
Bike has always been garaged and only has less than 200 miles, never registered. Comes with MSO for the frame, S&S Engine Certificate, and California Department of Motor Vehicles of Verification of Vehicle done by California Highway Patrol. Bike inspected by my local motorcycle shop and ran thru a 27 point inspection. Documentation available of build cost (Approximately $38K) and recent inspection. New battery installed and runs flawlessly. Bike comes with Easyriders magazine and sign from bike show. Email or call (559-790-3794) with any questions. Must see to appreciate the workmanship and detail! Shipping assistance available in California, out of state buyers please use USHIP to get a quote on shipping to your location.
2013-08-31 00:42:47
150
11,000.00
-
2016 Custom Built Motorcycles Pro Street (2016)
180 rear w/18" rim. Custom paint red with silver and maroon metal flake. Vance & Heins Slash cut outs.
2016-11-05 04:41:52
Northridge, California, United States
160
16000
-
CUSTOM BUILT PRO-STREET CHOPPER, 300 RIGID (2008)
Up for your consideration is my custom built pro-street rigid. The bike is listed as an 08 but has less than 300 miles on it. The custom features are extensive so I'm sure I will forget something.
2013-10-14 00:07:40
200
6,100.00
-
S&S 124" w/ round barrels, Baker 6-Speed RSD, Stretched, Easyriders Show Winner (2007)
This is a home built, first build of a 2007 Custom Pro-Street completed in 2009. The Carolina Custom frame is stretched 8” over on the backbone and -4” on the down tube with a diameter of 1 3/8” steel tubing. The triple trees and front forks are at 52 degrees.
2013-10-19 00:50:13
San Leandro, California, US
400
24,000.00
-
2014 Custom Built Motorcycles Pro Street (2014)
You are looking at a totally custom one of a kind Retro Nouveau Cafe bike built by Chica Custom Cycles. Although this bike is titled as a 2004 this bike was completed in 2014. This complete bike has less than 500 miles on it.
2016-06-22 04:59:50
San Clemente, California, United States
500
39,000.00
-
2004 Custom Built Pro Street Motorcycle (2004)
2004 Pro-Street Chopper
2 Time Award Winning – Best In Class/Best In Show
· Custom Diamond Chassis 7” back bone stretch
· Custom Oil Bag
· 100cu inch Rev Tech Polished Engine
o Edelbrock 2 barrel carb & intake
o 100+ Horse power
· Pingel Polished Fuel Value & Filters
· Rev Tech 6 Speed Polished Trans
o 1 ½ belt Drive
o All Custom Polished Pulleys BDL 3” Primary Belt Drive - Polished
o Custom Chrome High Crank Starter
o Low-Boy Odyssey Drycell Battery
· Custom Bars / Upper Controls
o Hidden Cables
· All Custom Sheetmetal
· Headwinds 7” Head Lamp
· Custom LED Brake Light/Blinkers
· Custom Airbrush Paint Job – 17+ coats
· Performance Machine Front & Rear Disc Brakes
· Performance Machine Foot Controls
· Custom Stingray/Leather Seat
o 2 Stage Padding
· Custom Fat Fork Design
· Billet Polished Aluminum Wheels
· Avon 250 Rear Tire
· Avon Front Tire
· Must See To Appreciate!! BUYER RESPONSIBLE FOR PICKUP OR SHIPPING, REQUIRES $500 DEPOSIT IMMEDIATELY FOLLOWING THE CLOSE OF THE AUCTION. GOOD LUCK
B
2013-09-03 08:19:56
Escondido, California, US
500
500.00
-
Phat Daddy 300' Wide-Collector Custom Quality-113" show mtr-Pro Street-Chopper (2004)
~iMMACULATE CUSTOM PRO STREET~
"Collector Quality"
"STEALTH SILVER 300' WIDE"
One of kind and like New
Super Custom Show Quality Custom Bike all metal Fabrication by ZACKYS CUSTOMS
This beauty has to many Custom Features and needs somebody who can ride this PHAT DADDY WIDE, Bottomline to many toys and no time !!!!
Bike Details list.
18" one of kind front wheel with matching 18"x 11" black/machined rear wheels
300 avon rear tire.
Smooth handlebars with internal throttle.
2013-10-19 00:01:32
800
19,950.00
-
CUSTOM MGS-COLLECTOR QUALITY-LIKE NEW -113" PATRICK RACE MTR-PRO STREET- CHOPPER (2005)
~iMMACULATE CUSTOM PRO STREET~
"Collector Quality"
"EL SCORPION ROJO"
One of kind and like New
Super Custom Show Quality Custom Bike all metal Fabrication by MGS CUSTOMS
This beauty has to many Custom Features and needs somebody who can ride this work of art, Bottomline to many toys and no time !!!!
Bike Details list.
21" chrome front wheel with matching 18" chrome rear - PM wheels
250 tire.
2013-08-31 00:55:03
1,000
25,000.00
-
2004 Wicked custom fabrication prostreet chopper - true one of a kind (2004)
2004 Wicked Image Custom Pro Street
Bike is one of a kind. Complete custom from ground up. Many many custom parts, wheels are one of a kind, frame is one of a kind custom.
2013-10-02 22:14:11
Long Beach, California, US
1,500
24,500.00
-
2006 MGS "PRO STREET" CHOPPER - SHOW WINNER!!! (2006)
This is a 2006 MGS PRO STREET CHOPPER. It was built with no expense spared. Absolutely amazing bike! here is a list of some of the bike's features :
Lowlife frame with MGS molded down tube
MGS tank, fenders, pipes, and molded rear parts
Legend air ride suspension
121" TP Engineering "PRO SERIES'" engine
Baker six speed trans ( belt drive)
Accutronix & PM hand and foot controls w/hydraulic clutch
Headwinds headlight
Custom Airbrushed paint with candy red base coat
Danny Gray Croc seat
Custom one off wheels
21" front 18" rear with a 300mm tire
speedo/ odometer gauge built into bars
hidden wires and more...... --------OVER $ 65k when built--------
Bike is All Chrome and airbush. NEEDS TO BE SEEN IN PERSON TO APPRECAITE IT!!
2013-09-03 09:48:48
Atascadero, California, US
1,500
32,000.00
-
Flawless custom Pro One 1860cc with very low miles black with blue flames (2007)
Flawless
114 Cubic Inch
1860 cc
2300 Miles
Custom seat with blue flame stitching
Matching removable passenger seat
Custom paint by Buck Wild
Vance & Hines Big Radius Exhaust
Pro-One chrome plated billet aluminum wheels with matching brake rotors, and pulley stainless brake rotors with chrome billet aluminum centers
300mm Avon rear tire, right side drive
41mm chrome front suspension, featuring hard-chrome fork tubes
Dual adjustable shock rear suspension
Pro-One billet aluminum 4-piston brake calipers
Custom fuel tank with flush mount cap, 4-gal capacity
Pro-One stinger handlebars with all-in-one digital readout instrument console
Braided stainless steel brake and oil lines
Fully polished engine with chrome accessories
45mm Mikuni carburetor
2013-10-17 00:54:41
2,300
15,999.00
-
2003 Pro Street Custom (2003)
Take a look at this $47K+ invested motorcycle at a seriously reduced price. This bike is custom built from the ground up, and has a clear special construction title. Low miles - only 4995.
2014-07-11 16:50:38
Paicines, California, United States
4,995
5000
-
Special Construction Pro Street Softtail Custom Harley Chopper (2001)
Special construction harley for sale. This is a very nice bike built with some of the best components. -Santee frame-Legend air ride-Corbin seat-Performance Machine wheels, brake rotors/ calipers, hand controls and passenger pegs-Accutronics forward controls-21" front wheel 18"x180 rear-BDL open primary-S&S 100" engine just rebuilt...
2013-09-27 00:20:59
5,000
10,000.00
-
ron simms custom motorcycle (2002)
2002 Ron Simms custom, 131'' thug engine, 6-speed baker trans, BDL belt drive primary, 240mm rear tire, 18'' pm wheels, 13'' pm rotors, pm hand controls and foot controls, signature pm Simms calipers, legend air ride, Simms Thunder header pro-pipe. New parts include all brake lines, throttle cables, clutch cable, speedo cable, oil lines, fuel lines, fork seals and dust covers, fork oil, rotor bolts, pulley bolts, seat pan and upholstery, pm grips, handlebars, gas tank bolts, hand control switches, indicator lights, turn signal lens, headlight and visor. Re-chromed parts include triple trees, hand controls, center of floating rotors, primary cover, brake light mount, rear turn signals, axel covers, rear pulley, front axel covers, Storz forks where rebuilt, polished and anodized black. I had the engine rebuilt and polish $2400.
2013-09-05 08:45:37
9,800
14,850.00
-
20006 Arlin Ness lowliner custom motorcycle (2006)
2006 ARLEN NESS LOWLINER, 11000 MILES. Incredible black, Blue, and silver Skull graphics.S and S 124 premium polished motor and 6-spd transmission. Ness Y2k frame, with twin billet progressive shocks and rubber-mounted motor for unbelievable ride comfort.
2013-08-31 00:39:33
Sacramento, California, US
11,000
25,000.00
-
Pro One Custom Pro Street Polished S&S Harley 6-speed trans (2001)
Beautiful 2001 Pro-One, 113" All Polished S&S engine, Dyno @ 107 HP with 115 Lbs of Torque. Jims 6-Speed Transmission, Vance & Hines 2 into 1 Exhaust, Quad 4-Link rear suspension, 5" stretch frame, 38 degree rake front end, Everything Polished or Chromed, Eye catcher Candy Orange Paint with graphics. Minimal small chip in rear fender. Beautiful Bike, Fast, fun and comfortable to ride.
2013-09-03 07:48:50
15,882
5,000.00