Honda CB tech info
Honda CB description
This bike runs great and has no mechanical issues. I just took it for a 200 mile ride with no problems and the bike is comfortable at 90, but thats not it's top speed.
I am a professional mechanic and I did all the work on it, and as I did it I painted all the small parts on the bike, and polished all the aluminum parts then clear coated them. It dulled the shine some but it makes it so you will never have to polish them again. Has new progressive springs front and rear, rebuilt front forks with new seals, new front pads and all brake calipers painted. Carbs are fully cleaned and rebuilt, tuned and synced, also painted and polished. 4 into 1 header has been painted and wrapped, then installed with new gaskets. Entire engine, transmission, and frame painted with VHT paints. Failed fuel tank liner was removed, rust removed with acid, then inside of tank was etched with phosphoric and a new Caswell clear fuel tank liner was installed. The body panels have been painted Honda Nighthawk Black Pearl, but is not a show quality paint job. There are a couple chips that were not filled in before painting, and the clear coat was never buffed and polished. The only defects that are easily seen are two bumps on top of the tank, on the right side. You can see one of them in the picture showing the inside of the tank. Ive had this bike for almost a year, and have a little over 2,000 in it now. It's my daily driver so the milage will continue to go up. buyer is responsible for pickup, and If you hire a shipping company, I'll assist them as much as I can. If its not to far away I can deliver it myself for 50 cents a mile, plus $50 for every 10 hours of driving. |
Honda CB for Sale
- 1974 honda cb(US $1400)
- 2004 honda cb(US $3,395.00)
- 1968 honda cb(US $2600)
- 1980 honda cb(US $1,200.00)
- 1976 honda cb(US $13000)
- 1975 honda cb(US $5,200.00)
Moto blog
Honda MotoGP Production Racer Undergoes Testing at Motegi
Mon, 27 May 2013Development of Honda‘s new production racer is well underway, as the new (relatively) low-cost MotoGP racebike underwent testing at Japan’s Twin Ring Motegi circuit May 23-24. Conceived as a lower-cost option for race teams, the production racer project is running slightly behind schedule but Honda still expects it will available in time for the 2014 MotoGP season. Early reports estimate the price for the production racer to be around US$1.26 million, a substantial price, but still considerably less expensive than rumored $3.9 million it currently costs to lease a Honda RC213V for one season.
Having a Randy Mamola moment
Thu, 10 May 2012Back in 1985 Randy Mamola was captured on film performing the most miraculous save of all time, hanging on for dear life as his Honda NSR500 tried to fling him from his seat. Recently, we've seen some impromptu homages to the original with Jonathan Rea at Assen and the near-save from Jakub Kornfeil in the Moto3 race at Jerez. Now we have on-board footage of American racer Genki Hagata calming a high-side at the Infineon Raceway in California.
US Motorcycle Thefts Down 6% in 2011
Tue, 09 Oct 2012Americans reported 46,667 motorcycle thefts in 2011, a 6% decrease from 49,791 stolen motorcycles in 2010, reports the National Insurance Crime Bureau. Despite the drop in reported thefts, the non-profit organization representing nearly 1100 property and casualty insurance companies says the theft rate still averages out to one motorcycle stolen every 11 minutes in the U.S. The numbers were published in the NICB’s 2011 ForeCAST Report which examined theft reports as well as recoveries.
Honda CB by State
| Honda CB by City
| Honda CB by Color
|