Ducati Tt1 Replica - 88hp, Track Ready on 2040-motos

Ducati Other description

With 88 rear wheel horsepower in a sub-300lb package, this example is arguably the quickest and best handling old-school TT1 in North America. 

I built this TT1 using period components as a relatively faithful replica of the TT1s that ran in the AMA BOTT GP class back in the day.  The only deviation being the modern (90s) calipers and pumps, ignition coils and the non standard crankcase breather box in the seat.  However, it differs from most TT1 replicas in that it was built to be a fast and reliable track bike.  Over the years I’ve found that the only TT1 frame that seems to work well with modern 17â€� wheels & slicks is the final series Verlicchi large diameter, thin wall.  Back in the day, Reno Leoni had his brother-in-law (DM Frames) make a copy of the Verlicchi and DM has since modified the jig to allow for the use of a big block motor.  The DM version was checked digitally last year against the Verlicchi and they are geometrically identical, however the DM is 12mm longer between the upper cross brace and the steering head.  I countered this somewhat with the offset on my triple clamps, but the small difference in trail gives the DM a bit more stability with a very small decrease in agility. 

The specs are:

CHASSIS

• DM TT1 Frame
• Marvic 3-spoke magnesium wheels with floating 280mm Brembo rotors front and 260mm rear
• Brembo P3034 calipers with authentic Brembo racing caliper adapters
• Brembo 996 series pumps
• Authentic TT1 Brembo rear master
• Marzocchi M1R forks substantially modified by Lindeman engineering back in the day (they work like no M1R I’ve ever experienced)
• Authentic TT1 Marzocchi 195mm triple clamps
• TZ replica throttle
• Scitsu electronic tachometer
• Ducati early 851 clip-ons (Verlicchi)
• Authentic NCR electrics plate
• Bosch ignition (rewired pick-ups) with Dyna 3 ohm coils
• Custom-built Stadium shock (rebound plus Hi & Lo speed compression adjustment)
• Ducati 750 F1 aluminum swing arm
• Leoncinni TT1 Replica floating rear brake caliper mount
• Leoncinni TT1 Replica rear sets
• Old Racing Spares endurance tank and TT1 seat with custom, integrated breather box
• Bimota DB1R fender & mount
• Romanelli TT1 fairing
• loudbike open NCR replica exhaust
• loudbike 85db Weber exhaust

• 750 Sport-based bottom end built by Gary Palmer
• 800SS rods
• Lightened clutch basket, clutch housing, primaries and flywheel
• JPrecision heads with new valves, guides & seats and NCR #7 cams with STM adjustable pulleys
• Modified F1B pistons (12.5:1 compression)
• Mikuni TM Pro-series 41mm flat slides
• Mikuni vacuum fuel pump
• Modified Old Racing Spares cam end covers
• Oil cooler with Starlite hoses, Earls fittings and top-end lubrication via cam end cover feed
• Magnesium rocker covers
• Dyno-tuned to 88hp, 56ftlbs torque

The whole kit is held together with over $900 in titanium and aluminum fasteners.  Every bearing and seal in the motor and on the machine is new. 

The bike is a highly-developed example of an old-school TT1 – works brilliantly on the track and handles better than any TT1 I’ve ridden.  The bike and motor were built with care and a high level of attention to detail over an 18 month period.  It was broken in correctly on the dyno and then saw six horsepower/tuning pulls and roughly 4.5 hours of track time.  I’ve run the bike at Calabogie and Mosport – and came away delighted with the performance and handling on both occasions.  

The fiberglass fairing is a period piece, so there are some minor surface cracks already starting to show.  As well, there is some minor paint blistering (two quarter sized areas) from heat off the 95bd exhaust.

You can see the dyno runs at:

http://www.youtube.com/watch?v=h6lMRYyqrz4&feature=share&list=UULXdTYwizBnNNHuc_JRjwKw

http://www.youtube.com/watch?v=-mt_-oKAIMs&feature=share&list=UULXdTYwizBnNNHuc_JRjwKw

You can read about the progress of the build on my blog at:

http://loudbike.blogs.com/loud_bike/2013/07/back-in-the-saddle.html

http://loudbike.blogs.com/loud_bike/2012/09/4th-annual-ducati-tt-f1-symposium.html

http://loudbike.blogs.com/loud_bike/2012/05/ducati-750-tt1-and-bimota-db1-sr-builds.html

http://loudbike.blogs.com/loud_bike/2011/12/winter-2011-loudbike-vs-bimota-db1-sr-ducati-tt1.html

And there are hi-resolution photos on my Flickr site:  http://www.flickr.com/photos/loudbike/sets/72157635863581524/  To get to the hi-rez images, select one and then click on the icon in the lower right of the page (three white dots) and select view all sizes from the drop-down menu.

The bike will be at the 5^th Annual TT & F1 Symposium at New Hampshire International Speedway from October 4 – 6^th; which presents US buyers with an ideal opportunity to save on shipping.

Add gas, push the starter button and go fast.  It even idles. 

International shipments:
Tony or Amanda
Inter-Par Logistics Inc.
3845 Nashua Drive
Mississauga, ON   L4V 1R3
Tel.: 905-678-1288
Fax: 905-678-1289
e-mail: tl@inter-par.com or sc@inter-par.com

Questions?  Please feel free to send me an email at steve@loudbike.com - or you can call me at 1.866.972.5683 / 1.613.521.9515